Category 2 · Materials Processing · B · Test, Inspection and Production Equipment

ECCN 2B992

Non-“numerically controlled” machine tools for generating optical quality surfaces, (see List of Items Controlled) and “specially designed” “parts” and “components” therefor.

AT — Anti-Terrorism
License Requirements · eCFR texteCFR 2026-11-09

Reason for Control

AT

Control(s) · Country Chart column

Control(s)Country chart (see Supp. No. 1 to part 738)
AT applies to entire entryAT Column 1

List Based License Exceptions (as published)

  • LVS: N/A
  • GBS: N/A

List of Items Controlled

Related Controls: N/A

Related Definitions: N/A

Items (9 lines)

a. Turning machines using a single point cutting tool and having all of the following characteristics:

a.1. Slide positioning accuracy less (better) than 0.0005 mm per 300 mm of travel;

a.2. Bidirectional slide positioning repeatability less (better) than 0.00025 mm per 300 mm of travel;

a.3. Spindle “run out” and “camming” less (better) than 0.0004 mm total indicator reading (TIR);

a.4. Angular deviation of the slide movement (yaw, pitch and roll) less (better) than 2 seconds of arc, TIR, over full travel; and

a.5. Slide perpendicularity less (better) than 0.001 mm per 300 mm of travel;

b. Fly cutting machines having all of the following characteristics:

b.1. Spindle “run out” and “camming” less (better) than 0.0004 mm TIR; and

b.2. Angular deviation of slide movement (yaw, pitch and roll) less (better) than 2 seconds of arc, TIR, over full travel.

Technical Note: The bidirectional slide positioning repeatability (R) of an axis is the maximum value of the repeatability of positioning at any position along or around the axis determined using the procedure and under the conditions specified in part 2.11 of ISO 230/2: 1988.

Country Chart row viewer

Shows the X marks in the columns this entry cites (Supplement No. 1 to Part 738) for one destination. It does not state a license conclusion.

Loading…

Source: https://www.ecfr.gov/api/versioner/v1/full/2026-11-09/title-15.xml?part=774. eCFR issue date 2026-11-09; last checked for a newer eCFR issue 2026-11-16. The eCFR is not the official legal edition of the CFR. Official tools: BIS Interactive CCL · SNAP-R (CCATS) · eCFR Supplement No. 1 to Part 774. Classification of your product is not provided here — see SNAP-R / CCATS.